High-torque, lithium-powered pruning systems direct from Chongtai Industry & Trade factory floor.
In modern commercial agriculture, viticulture, and municipal landscaping, the mechanical transition from traditional manual shear cutting to high-torque electric secateurs represents a dramatic inflection point in operational efficiency. Global agricultural enterprises are facing acute labor shortages, rising workforce costs, and strict ergonomics regulations. Custom Electric Secateurs have shifted from luxury accessories to critical capital investments that dictate crop yield, labor optimization, and overall orchard profitability.
At Chongtai Industry & Trade Co., Ltd., our engineering roadmap focuses on solving the primary mechanical failure points of legacy cordless tools: motor overheating under continuous load, gear tooth shearing, battery degradation, and rapid blade edge dulling.
We utilize high-efficiency Brushless DC (BLDC) motors equipped with neodymium permanent magnets. This design yields a 35% higher torque-to-weight ratio over brushed motors while eliminating carbon brush friction, reducing thermal build-up during 8-hour continuous shifts.
Blades are hot-forged using Swiss SK5 high-carbon steel, subjected to vacuum heat treatment (HRC 60-62), and coated with a anti-corrosive Titanium plating. This ensures maximum sharpness retention even when severing 40mm hardwood branches.
Integrated 16.8V, 21V, and 42V Lithium-ion platforms feature active Battery Management Systems (BMS) with over-current protection, individual cell balance balancing, short-circuit shutdown, and thermal cutoffs.
To help enterprise procurement teams select the exact mechanical configurations required for their regional crops and pruning intensity, Chongtai provides standardized technical specs across our primary product line:
| Model Code | Max Cut Dia. | Rated Voltage | Motor Type | Blade Material | Battery Capacity | Weight (w/ Batt) |
|---|---|---|---|---|---|---|
| CT-9601 | 22mm | 4.2V / 16.8V | Coreless Brushless | SK5 High Carbon | 2.0Ah Li-ion | 0.85 kg |
| CT-9603 | 28mm | 16.8V | Industrial BLDC | Titanium Coated SK5 | 2.5Ah Dual Pack | 0.98 kg |
| CT-9604 | 32mm | 21V | High-Torque BLDC | Teflon-Coated SK5 | 4.0Ah HD Pack | 1.15 kg |
| CT-9605 | 40mm | 21V Ultra Power | Heavy-Duty BLDC | Swiss Forged SK5 | 4.0Ah / 5.2Ah | 1.30 kg |
| CT-9606A/B | 28mm | 16.8V / 21V | Smart Sensor BLDC | SK5 Laser Cut | 2.6Ah Removable | 0.92 kg |
| CT-9607A/B | 32mm | 21V Smart Chip | Digital Sensor BLDC | Swiss SK5 Hardened | 4.0Ah Smart Pack | 1.18 kg |
Modern enterprise tools must protect operators while delivering real-time telemetry. Chongtai's flagship electric secateurs feature high-definition LED displays integrated into the chassis, displaying real-time metrics including live cut counts, battery percentage, dynamic temperature sensors, and fault code alerts.
Furthermore, our Anti-Cut Induction Safety System uses human-body capacitive sensing. If the operator's bare hand or conductive safety glove contacts the blade edge, the micro-controller interrupts the circuit and reverses blade travel within 15 milliseconds, significantly reducing occupational injuries in high-velocity workplace conditions.
Located in Jinhua, Zhejiang—China's hardware capital—Chongtai Industry & Trade operates a modern 10,000+ m² smart facility dedicated to high-precision electric tool manufacturing.
With 150 skilled staff and specialized R&D centers in both Jinhua and Ningbo, we integrate component engineering, motor winding, plastic injection molding, and assembly under one quality management system.
Certified under ISO9001, every production batch passes 100% full-load stress testing, dynamic balancing, blade fatigue testing (over 50,000 continuous cuts), and waterproofing checks before shipping.
We support international distributors, brands, and commercial buyers with customized casing colors, private labeling, modified gear ratios, bespoke battery branding, and localized packaging solutions.
Every crop type requires a specific cutting dynamic. Chongtai configures tool profiles to match specialized agricultural demands globally.
Challenge: Intensive daily pruning across hundreds of acres of apple, citrus, or nut trees leads to high operator fatigue and equipment breakdowns.
Chongtai Solution: Deploying CT-9605 (40mm) and CT-9607 (32mm) heavy-duty secateurs paired with high-density 4.0Ah battery packs allows continuous 8 to 10-hour operations. The ergonomic grip reduces wrist shear strain by 70%.
Challenge: Grapevines require quick, precise, razor-sharp cuts without splintering wood fibers, which can introduce fungal infections or vine dieback.
Chongtai Solution: Our micro-controlled blade speed profiles and Swiss SK5 razor blades deliver clean cuts that preserve vascular integrity, encouraging rapid callousing and healthier vine growth.
Challenge: Urban green spaces require low-noise operation, compliance with zero-emission zones, and high adaptability for overhead pruning tasks.
Chongtai Solution: Combining our 21V low-noise brushless electric secateurs with light extension poles (Electric Pole Pruners) allows teams to trim overhead branches safely from the ground without hydraulic lifts or gas tools.
Chongtai is actively expanding the frontiers of automated pruning systems. Our future engineering roadmap integrates real-time IoT diagnostic modules into every tool system:
Entering European, North American, and East Asian markets demands strict adherence to safety and environmental standards. Chongtai products undergo rigorous testing to achieve broad global compliance:
Custom color injection molding, laser-etched logos, branded packaging boxes, localized user manuals, and customized battery housing artwork for worldwide brands.
Adjustable opening sizes (e.g., 20mm to 40mm cut modes), custom gear ratios for specific wood densities, and variable battery capacity configurations (2.0Ah up to 5.2Ah).
Technical and commercial clarity for importers, agricultural distributors, and procurement managers.
Our standard MOQ for OEM custom branding (custom housing colors, logo printing, and personalized packaging) starts at 500 units per model. For standard factory-branded orders, we support smaller test orders starting at 50 to 100 units.
Depending on branch hardness and battery configuration (2.0Ah vs 4.0Ah), a single 21V 4.0Ah battery typically lasts 4 to 5 hours of continuous pruning (approx. 4,000 to 6,000 cuts). Dual-battery kits provide full 8 to 10-hour workday coverage.
Our tools feature a dual-switch safety trigger system to prevent accidental actuation, an automatic sleep mode after 60 seconds of inactivity, and optional Smart Anti-Cut Induction technology that reverses blade movement instantly upon touching skin.
Forged Swiss SK5 steel blades maintain sharp cutting performance for approximately 80,000 to 100,000 cuts in softwoods before requiring sharpening or replacement. Chongtai supplies full replacement kits including upper blades, lower counter-blades, gear sets, and BMS boards.
Yes, our smart digital models (such as CT-9604, CT-9605, CT-9607) feature progressive cutting control. By holding the trigger for 3 seconds, operators can toggle between half-open (e.g., 20mm) and full-open (e.g., 40mm) modes to conserve battery when cutting smaller stems.
Standard sample orders ship within 3 to 5 business days. Full container orders (20ft/40ft) typically ship within 25 to 35 days after artwork approval and deposit confirmation from our Jinhua facility.
Explore our extended series of electric pruning shears, mini chainsaws, and high-reach pole tools.
Upgrade your tool lineup with high-torque, smart electric secateurs manufactured under strict ISO9001 quality controls. Contact our engineering and OEM team in Jinhua for direct factory quotes.
Inquire Factory Pricing & OEM Solutions
Chongtai